Order status View Order Status Checkout Checkout Email Email store

 

Search our store   

 

 

 

 

 


Home » O Scale Kits

 Checkout

« Previous | 1 | 2 | »

Product ID C2540
O Scale Row Boats with Oars

Cast resin O scale Row Boats with Oars mastered from original 3D prints.

Small assembly is required to install the wooden seats provided. Then painting the boats and oars. Brown or Grey boats will be provided randomly. No choice as to which color. Both are resin and paint the same. Some sanding may be required.

Place on your layout, diorama, in streams, lakes or on shore. Add people fishing. Be imaginative.

^Click on Photo above to see larger images.

NOW SHIPPING

Price: $8.95
Add to cart
Product ID K4501
O Scale Backwoods Water Tower
In Stock 1

Note: Photo is by Chris Comport and is of his rendition of the Backwoods Water Tower. More of Chris's  fine work can be seen at hjttp://www.chriscomport.com 

Release 2 with new 3D printed detail pieces. This O Scale interpretation of a Backwoods Water Tower is of a design you would expect from creative backwoodsmen who used what was available to them.
You can imagine the Shays and other logging locomotives pulling up to this reservoir on the hill to fill their thirst for water.

Click on photo to see larger photo and a more complete description.

We are making these kits up as fast as we can. If stock is 0, check back in a few days. Also click on "notify when Back in stock".

Price: $69.95
Add to cart
Product ID K4502
O Scale Freight Depot

<<Click on photo above for more details and larger photo

The Fall Creek Freight Depot is a laser cut craftsman kit. The Freight Depot has a small foot print but lots of detail. From the fancy inlaid freight doors to the curved gingerbread on the ends this smart looking little beauty will be a bonus to your layout.

(Trucks in picture not included in kit)

Price: $76.95
Add to cart



Product ID K4505
O scale Hardware Store Kit

Hap Hazard’s  HARDWARE - SEED & FEED STORE

in O Scale

Pictured is O scale version as done by master modeler Marty Jones. Marty has chose to customize his rendition of the Hardware Store. Photo by Marty Jones.

From the three story, four room structure to the loading dock area, we have attempted to provide a quality kit with as much care as possible. The building structure can represent any time period from the early 1900’s up to present day. There is a nice collection of  resin detail castings giving you an ample supply to show an operating Hardware, Seed and Feed store. The original plan was for the Hap Hazard’s Hardware – Seed & Feed Store and decals for that name are provided but you are free to rename the building to fit your particular needs.

The Hardware Store is an all around viewable model. It has very interesting viewing from all sides and would be best placed either in a diorama or on a layout island. The building is designed to be placed in any setting, hilly or flat, even waterfront if the modeler so chose. It comes complete with all pilings, braces, joists and decking in stripwood. There is a resin cut stone foundation casting for under the front building. The building is constructed of laser cut sub-walls of 1/32" plywood which are then laminated with Northeastern Scale Lumber basswood aged siding for the front store building and two layers of the 1/32" plywood form the back barn building. This, and the method of interlocking floors and 1/32" plywood roof panels give a very sturdy construction that is not prone to warping. Includes a 114 page instruction manual with many detailed photos.

Click on picture at top to see more detailed information and additional pictures.

NOTE: People, vehicles, trees and track and general diorama construction materials shown in pictures are not included in this kit. Pictures show are of the prototype model and production models might vary slightly from the prototype.

Price: $149.95
Add to cart
Product ID K4506
O Scale Mason General Store

MASON GENERAL STORE

<<Click on photo above for more details and larger photo

An O scale Rendition of the Silver Plume Store. A nice kit for a beginner or even an experienced builder. Made from 1/8" laser cut basswood with 1/32" birch plywood laser cut details such as windows, doors and trim. Top that off with resin detail castings for things like the display boxes for the front windows and also the roof top chimney.

Price: $39.95
Add to cart
Product ID K4517
O Scale Tie Hacker's Cabin
<<Click on photo above for more details and larger photo

TIE HACKER'S CABIN IN O SCALE

We will be making more of these kits. So, if you missed purchasing one just click on "notify when back in stock" below and you will receive an email when more are available.

This is an original scratch built design created by (the late) Mike Chambers about three years ago in a thread on the Railroad-Line Forums. I purchased the rights to reproduce the Tie Hacker's Cabin as a kit and after months of work with the drawings and photographs provided to me by Mike, the kit is ready for you to enjoy.

NOTE: the O scale version is less-stripwood. You need to provide your own stripwood materials. There is a list in the kit of what is needed.

Price: $94.95
Add to cart



Product ID K4518
O Scale Hoosegow Jail Kit

<<Click on photo above for more details and larger photo

The HOOSEGOW(Jail) Kit is a small town 2 room jail consisting of an office area approx. 8x8 feet and a jail cell approx. the same size. The whole building doesn't measure more than 9 feet wide by 17 feet long. 2-1/4" x 4-1/4" in the Real World. It stands 12' high on the flat foundation and 16' on the stone cast foundation. 4" in the Real World.

This model features aged brick walls both exterior and interior. Interior partition wall brick faced both sides. Jail bars on the cell windows and in the partition between the office and the cell. Double hung windows in the office and a removable roof if you care to model it that way.

Price: $59.95
Add to cart
Product ID K4521
O Scale Passenger Station Kit

NOW shipping

The Passenger Station is based on a late 1800's C&O standard station design. Much effort has gone into reproducing the Passenger Station as close prototype as can be done in scale. Care to quality has been utmost in our minds. Our resin chimney casting does not contain lead so it is safe to handle. Care is taken to ensure all parts are free of defects both in manufacturing and in shipment.

 <<Click on photo above for more details and larger photo

Price: $79.95
Add to cart
Product ID K4523
O Scale Brown's Bakery Kit

O Scale Brown's Bakery Shop kit

Now Shipping

Click on "Notify when back in stock" below to get an email when these are ready to order.

This small town building was designed using original drawings produced and published by Editor Bob Brown of the Narrow Gauge and Short Line Gazette back in the early 1950's.

The building is narrow and deep and will fit in nicely in a small town main street.

Click on the photo above to see more description and larger photos.
Price: $59.95
Add to cart

« Previous | 1 | 2 | »

Google
 
Shopping cart
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Login Status  Login Status

Not logged in

» Login


Join Our Mailing List

be sure your email address is correct!


VISIT US ON


 

 Custom Spider Map for www.rustystumps.com

 

 
Credit cards home | about us | products | search | view cart | contact us