Order status View Order Status Checkout Checkout Email Email store

 

Search our store   
menu
 
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
 
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
 

Rusty Stumps

Scale Models
6785 Cherry Blossom W. Dr.
Fishers, IN 46038
(317) 595-9489

 

Email:

info @ rustystumps . com

 

NOTE: Be sure to remove the

spaces in the above

email address.

 

 

 

 


Home » O Scale Roofing

 Add to cart Checkout
Product ID: W5502
O Scale Real Cedar Random Shake Shingles
In Stock: 587
O Scale Real Cedar Random Shake Shingles
  (Enlarge)  

Real Cedar shake random cut shingles. This is a non-aromatic cedar and the sheet is 4.5" x 12".

NOTE: We do not recommend the non-adhesive on these shingles as the sheet may split apart in shipping as well as during handling. We can not be responsible for this happening and they will not be returnable.

12" exposure are 23 strips approx. 4" long on each sheet and 2 sheets to each package. That's around 48 square inches of shingles at a 50% overlap.

6" exposure are 46 strips approx. 4" long on each sheet and 2 sheets to each package. That's around 48 square inches of shingles at a 50% overlap.

We strongly recommend ordering the adhesive backing as cedar tends to split easily any you may end up installing individual shingles that way.

Also, pre-stain or pre-paint the shingles with aging solutions before installing as you get a more random, natural, aging look that way.

Installing Made Easy: Cut strips of masking tape about the width of the shingles (height) and apply across the full width of the shingle strip before cutting from the carrier sheet. Leave a tab of tape at each end. Cut the strip of shingles from the carrier sheet and turn over. Remove the protective backer from the strip if it's present. Apply the tape to your roof and burnish in place then remove the masking tape. The masking tape hold the strip together so it doesn't break apart between the shingles.

 

 
:
:
:
Email Friend
Price: $12.95

 
« Previous | Next »

 
Product Reviews

No Reviews For This Product.

Google
 
Shopping cart
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Login Status  Login Status

Not logged in

» Login
News

Mar. 10, 2014

Weather warming so we can work harder - We have had a rather hard winter here in the mid-west with temps down as low as -15 F degrees. This has slowed us in a lot of areas including old bones and muscles not able to work as fast as they should. Well, the weather is finally changing and we expect it to keep on getting better. This will allow us to do some cleaning and straightening around in both my in-house work area and also in the attached garage where I do the castings. I hope to get back to work on the Nick's Flop House kit and also bring out a bunch of new detail castings. Keep and eye out for both.

 

NOW 1/32" Plywood available for Laminate Wall Sheets We now offer 1/32" thick birch plywood as well as our RC Board for all Laminate Wall Sheets - Brick, Block, Stone and Ruled Sheets in all three Scales. These are the largest laser cut brick sheets anywhere.

 

 

 Custom Spider Map for www.rustystumps.com

 

Credit cards home | about us | products | search | view cart | contact us